400和410型無顯示器部件零件

產品型號：
更新時間：2023-12-17
產品介紹：400和410型無顯示器部件零件
Sample Pump （Sensidyne A） for Models 400 and 410 Nitric Oxide Monitors
SKU: NOPUMPSAMPLE
廠商性質：經銷商
在線留言

產品介紹

品牌	其他品牌	價格區間	面議
組件類別	光學元件	應用領域	醫療衛生,環保,化工,電子/電池

400和410型無顯示器部件零件

	Sample Pump (Sensidyne A) for Models 400 and 410 Nitric Oxide Monitors SKU: NOPUMPSAMPLE
	Ozone Pump (Sensidyne A) for Model 400 Nitric Oxide Monitor SKU: NOPUMPOZONE Note that this pump is for the Model 400 NO Monitor. The Model 410 does not require an Ozone Pump.
	Total Flow Pump (Sensidyne A) for Models 400 and 410 Nitric Oxide Monitors SKU: NOPUMPTOTAL
	Total Flow Meter Assembly for Model 400 and 410 Nitric Oxide Monitors SKU: FLOWMETER(TOTALFLOW)410
	Ozone Flow Meter Assembly for Models 400 and 410 Nitric Oxide Monitors SKU: FLOWMETER(OZONEFLOW)410
	Sample Flow Meter Assembly for Model 400 and 410 Nitric Oxide Monitors SKU: FLOWMETER(SAMPLEFLOW)410
	Needle Valve for Flow Control SKU: NDLVLV
	Lamp Assembly for Models 400 and 410 Nitric Oxide Monitor SKU: NOLAMPAS
	Quartz Absorption Cell for Model 400 and 410 Nitric Oxide Monitors SKU: NOCELL
	Photodiode Assembly for Models 400 and 410 Nitric Oxide Monitors SKU: PDASSEMBLY410
	LCD Assembly for Models 400 and 410 Nitric Oxide Monitors SKU: NODSP
	NO Valve for Models 400 and 410 Nitric Oxide Monitor, Nickel-Plated Brass SKU: NOVLVNO
	Ozone Valve for Models 400 and 410 Nitric Oxide Monitors, Stainless Steel SKU: NOVLVOZ
	Ozone Source for Models 400 and 410 Nitric Oxide Monitors SKU: OZSOURCE
	Reaction Coil for Models 400 and 410 Nitric Oxide Monitors SKU: REACTIONCOIL
	Adapter Box for Model 410/Model 401 Combination SKU: 410ADAPTERBOX To be used when connecting the Model 410 directly to a computer with the 9PinF-9PinF serial cable without going through a Model 401 NO2 Converter.
	Select Switch for Model 400 and 410 NO Monitors SKU: SELECTSWITCH410
	Power Pack for Models 211, 306, 400, 408, 410 and Ozone Monitors with External Pump, 100-240 VAC Input, 2.5 Amp Output at 12 V SKU: PWRPK-2.5 A In the shopping cart, you will be asked to specify the country for the AC plug.
	Internal Power Jack and Cable for Models 202, 205, 306, 400, 410 SKU: PWRASSY
	Serial Connector (Internal) SKU: SERCON Mounts to instrument case.
	Serial Cable for Connection Between Model 400 or Model 410 NO Monitor and Model 401 NO2 Converter SKU: SERCABL410/401 9 pin, Male-to-Male Serial Cable for passing power and data between the Model 400 or 410 NO Monitor and the Model 401 NO2 Converter
	Serial-to-USB Adapter for Model 400 and 410 Nitric Oxide Monitors SKU: SERUSB410
	Serial Cable for Connecting Instrument to Computer SKU: SERCABL This straight-through,female-female, 9-pin serial cable is required for RS232 communication with all 2B Tech instruments. Note: Serial cables purchased through electronics stores are usually "cross over" (pins 1 and 3 cross over) and not "straight through" and won't work with 2B Tech instruments.
	Particle Filter Housing for 47-mm Filters SKU: FILTERHS(47mm)
	Package of Ten 47-mm Diameter, 5-6 Micron Pore Size Teflon Particle Filters SKU: FILTERPK(47mm)
	DEW-Line Consisting of Two Nafion Tubes in Parallel for Humidity Equilibration in Models 106-L, 106-M, 202, 205 and 400 SKU: DEW Two Dew-Lines are required for the Model 205 Dual Beam Ozone Monitor because of the two flow paths.
	Internal Ozone Scrubber for Model 410 NO Monitor
	Internal NO Scrubber for Model 410 Nitric Oxide Monitor
	External NOx Scrubber for Models 400 and 410 This scrubber removes both NO and NO2 from sampled air. It is attached to the inlets of the Models 400 and 410 Monitors to determine the zero offset.
	Cleaning Loop set for Models 202, 205, 400 and 410 SKU: CLEANLOOP
	Model 410 Field Kit: Spare parts kit including: 1 Total Flow Pump, 1 Sample Pump, 1 Ozone Valve, 1 NO Valve, 1 External NOx Scrubber, 1 Lamp Assembly; 2 Internal NO Scrubbers, 2 DewLine Assemblies SKU: FIELDKIT410